29 917
modifications
Modifications
Sauter à la navigation
Sauter à la recherche
Ligne 78 :
Ligne 78 : − + + + Ligne 85 :
Ligne 87 : − +
→Pico, PowerBoost and Cansat Kit
[[Fichier:ENG-CANSAT-PICO-POWERING-20.png|480px]]
[[Fichier:ENG-CANSAT-PICO-POWERING-20.png|480px]]
{{Underline|What are the features:}}
{{ambox-stop|text=Some third-party LiPo cells have JST connectors wired opposite from the standard! Connecting these to the PowerBoost will damage your PowerBoost. Double check the polarity before connecting.}}
{{Underline|'''What are the features:'''}}
* Plug the USB on the Pico to refill the LiPo.
* Plug the USB on the Pico to refill the LiPo.
* Unplug the USB to make the LiPo powering the CanSat.
* Unplug the USB to make the LiPo powering the CanSat.
* PowerBoost LBO pin (Low Battery Output) is accessible on the breakout and may be useful to report battery state over the radio.
* PowerBoost LBO pin (Low Battery Output) is accessible on the breakout and may be useful to report battery state over the radio.
{{ambox-stop|text=WARNING: Do not connect LBO pin directly to a 3.3V GPIO!}}
{{ambox|text=WARNING: Do not connect LBO pin directly to a 3.3V GPIO!}}
{{underline|About LBO pin}}: the LBO Pin is pulled high to '''BAT''' voltage (so 4.2V when battery is fully charged) in normal operation. When the battery voltage drops under 3.2VDC then the LBO pin is tied to the ground.
{{underline|About LBO pin}}: the LBO Pin is pulled high to '''BAT''' voltage (so 4.2V when battery is fully charged) in normal operation. When the battery voltage drops under 3.2VDC then the LBO pin is tied to the ground.