Connect the MCP9808 to a BeagleBone Black as follows. If you aren't familiar with how GPIO pins are numbered, check out [https://learn.adafruit.com/setting-up-io-python-library-on-beaglebone-black/using-the-bbio-library this guide on BeagleBone Black GPIO] (''Adafruit, anglais'').
+
Suivez les instructions suivantes pour connecter un MCP9808 sur un BeagleBone Black.
+
+
Si vous n'êtes pas habitués avec l'utilisation et la numérotation des broches GPIO alors consultez ce [https://learn.adafruit.com/setting-up-io-python-library-on-beaglebone-black/using-the-bbio-library guide sur les GPIO du BeagleBone Black] (''Adafruit, anglais'').
{{ADFImage|RASP-MCP9808-BRANCHER-02.png}}
{{ADFImage|RASP-MCP9808-BRANCHER-02.png}}
−
* Connect '''BeagleBone Black P9_1''' DGND to MCP9808 '''Gnd'''.
+
* Connecter '''BeagleBone Black P9_1''' DGND sur la broche '''Gnd''' du MCP9808.
−
* Connect '''BeagleBone Black P9_3''' 3.3V to MCP9808 '''Vdd'''.
+
* Connecter '''BeagleBone Black P9_3''' 3.3V sur la broche '''Vdd''' du MCP9808.
−
* Connect '''BeagleBone Black P9_19''' I2C SCL to MCP9808 '''SCL'''.
+
* Connecter '''BeagleBone Black P9_19''' I2C SCL sur la broche '''SCL''' du MCP9808.
−
* Connect '''BeagleBone Black P9_20''' I2C SDA to MCP9808 '''SDA'''.
+
* Connecter '''BeagleBone Black P9_20''' I2C SDA sur la broche '''SDA''' du MCP9808.