Modifications

== Autres usages UART ==

== Autres usages UART ==

You can use the serial UART on the FT232H just like you would any FTDI friend or similar USB to serial UART.  Remember the FT232H breakout can work with 3.3 volt and 5 volt boards (that accept a 3.3 volt input as most do) so it's perfect for connecting to small embedded Linux boards like the Raspberry Pi.

Vous pouvez utiliser le port sérue UART du FT232H comme n'importe quel convertisseur "USB vers Serie" (comme le {{pl|FTDI Friend}} ou similaire) just like you would any FTDI friend or similar USB to serial UART.  Remember the FT232H breakout can work with 3.3 volt and 5 volt boards (that accept a 3.3 volt input as most do) so it's perfect for connecting to small embedded Linux boards like the Raspberry Pi.

For example to connect to a Raspberry Pi just connect the '''FT232H ground''' to '''Raspberry Pi ground''', '''D0 (TX)''' to '''Raspberry Pi RX''', and '''D1 (RX)''' to '''Raspberry Pi TX '''like below:

For example to connect to a Raspberry Pi just connect the '''FT232H ground''' to '''Raspberry Pi ground''', '''D0 (TX)''' to '''Raspberry Pi RX''', and '''D1 (RX)''' to '''Raspberry Pi TX '''like below: