Modifications

== Instructions d'installation ==

== Instructions d'installation ==

=== Sur votre Raspberry-Pi ===

=== Sur votre Raspberry-Pi ===

* Connect the aerial adaptor to the TV HAT. With the adaptor pointing away from the USB ports, press the HAT gently down over the Raspberry Pi’s GPIO pins. Place the spacers at two or three of the corners of the HAT, and tighten the screws through the mounting holes to hold them in place.  

* Connectez l'adaptateur d'antenne sur le HAT TV. Avec l'adaptateur dirigé côté port USB, pressez doucement le HAT sur le GPIO du Raspberry-Pi. Placeez les entretoises sur deux (ou trois) coins du HAT et utilisez les vis pour les maintenir en place.  

* Connect the TV HAT’s aerial adaptor to the cable from your TV aerial.  

* Connect the TV HAT’s aerial adaptor to the cable from your TV aerial.  

* Set up the Raspberry Pi with the newest version of the Raspbian operating system, which you can download from​ [https://rpf.io/startwithpi ​rpf.io/raspbian]<br /><br />If you don’t know how to do this, follow our guide at [https://rpf.io/usingterminal rpf.io/startwithpi]     

* Set up the Raspberry Pi with the newest version of the Raspbian operating system, which you can download from​ [https://rpf.io/startwithpi ​rpf.io/raspbian]<br /><br />If you don’t know how to do this, follow our guide at [https://rpf.io/usingterminal rpf.io/startwithpi]     

sudo apt-get install tvheadend

sudo apt-get install tvheadend

</syntaxhighlight>

</syntaxhighlight>

* During the TVHeadend installation, you will be asked to choose an administrator account  name and password. You’ll need these later, so make sure to pick something you can remember.  

* During the TVHeadend installation, you will be asked to choose an administrator account  name and password. You’ll need these later, so make sure to pick something you can remember.

=== Navigateur d'un ordinateur ===

=== Navigateur d'un ordinateur ===