AdaFruit Wave Shield Liste

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
Image Nom Description Qte
ADF-WaveShield-Part01.jpg IC1 3.3V linear voltage regulator, 250mA current 1
ADF-WaveShield-Part02.png IC2 12-bit DAC 1
ADF-WaveShield-Part03.png IC3 High-current opamp 1
ADF-WaveShield-Part04.png IC4 Level shifter for SD card

If you don't have this part, you've probably got a v1.0 kit. See the parts list below

1
ADF-WaveShield-Part05.png SD/MMC card holder 1
ADF-WaveShield-Part06.png TM1 10K or 50K Audio thumbwheel potentiometer.

Includes pot, thumbwheel and tiny screw

1
ADF-WaveShield-Part07.png X1 Stereo headphone jack with switches 1
ADF-WaveShield-Part08.png R7 1/4W 5% 1.5K resistor

Brown Green Red Gold

1
ADF-WaveShield-Part09.png R6 1/4W 5% 10K resistor

Brown, Black, Orange, Gold

1
ADF-WaveShield-Part10.png R8 1/4W 5% 100K resistor

Brown, Black, Yellow, Gold

1
ADF-WaveShield-Part11.png C8 0.01uF ceramic capacitor (103)

May look deceptively like the 0.1uF ceramic capacitors! Lately has been shipped in an 'axial' (not 'radial' package. See instructions for details.

1
ADF-WaveShield-Part12.png C2, C3, C5, C6, C7 0.1uF ceramic capacitor (104)

Looks deceptively like the 0.01uF ceramic capacitor!

5
ADF-WaveShield-Part12-1.png C1, C4, C9 100uF / 6V or greater capacitor 3
ADF-WaveShield-Part13.png xxxx Connecteur mâle 36 broches 2.54mm (1x36) 1
ADF-WaveShield-Part14.png xxxx Connecteur mâle 36 broches 2.54mm (1x36) 1
PCB Carte du circuit indiquant "v1.1" dessus 1

Traduit avec l'autorisation d'AdaFruit Industries - Translated with the permission from Adafruit Industries - www.adafruit.com

Toute référence, mention ou extrait de cette traduction doit être explicitement accompagné du texte suivant : «  Traduction par MCHobby (www.MCHobby.be) - Vente de kit et composants » avec un lien vers la source (donc cette page) et ce quelque soit le média utilisé.

L'utilisation commercial de la traduction (texte) et/ou réalisation, même partielle, pourrait être soumis à redevance. Dans tous les cas de figures, vous devez également obtenir l'accord du(des) détenteur initial des droits. Celui de MC Hobby s'arrêtant au travail de traduction proprement dit.