ENG-CANSAT-RFM69HCW-TEST

Forewords

It is now time to establish a communication between:

• a Data Emitter made with a Feather M0 Express + RFM69HCW-433MHz.
• a Data Receiver made with the second RFM69HCW that should be linked to a second micro controller.

As the kit contains only one micro controller (the Feather M0 Express), we will use the very common Arduino UNO (not included) as micro controller for the Data Receiver.

In this simple exemple:

1. The Data Emitter will send a message and wait 500ms for a response.
2. The Data Receiver will receive the message.
3. The Data Receiver will send a reply.

As we will see in the sample, 2 key items will be highlighted:

1. The frequency must be identical in the emitter and receiver (eg: 433.0 MHz in this example).
2. The encryption key must be identical on the both side.

Installing the library

If not done yet, we will have to install the RadioHead library in Arduino IDE.

That library support lot of RFM modules including our RFM69HCW.

Adafruit did fork the RadioHead library and add some useful sample, so we will install the small|Adafruit's RadioHead forked library.

Download RadioHead forked library

For easy install, you can run Arduino IDE and open the menu "Sketch -> Add a .ZIP library..."

Then pick-up the downloaded RadioHead ZIP file.

Once installed the RFM69 examples are available from the menu "File -> Examples".

---

Written by Meurisse D. from MC Hobby - License: CC-SA-BY.