Différences entre versions de « ENG-CANSAT-FEATHER-M0-FORCING-FLASH »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
Ligne 9 : Ligne 9 :
  
 
== Workaround ==
 
== Workaround ==
Activate the Flash Mode  
+
Activate the Flash Mode before compiling your sketch.
 +
 
 +
To do so, '''PRESS TWICE the reset''' button.
 +
 
 +
[[Fichier:ENG-CANSAT-FEATHER-M0-FORCING-FLASH.jpg]]
 +
 
 +
Once done, the Flash Mode is activated and the board will show itself as an USB Stick (Windows and other operating system does show a file navigation window).
  
  
  
 
{{ENG-CANSAT-TRAILER}}
 
{{ENG-CANSAT-TRAILER}}

Version du 3 novembre 2018 à 22:01

Page-under-construction.pngPage(s) en cours de traduction/élaboration.

Page(s) under translation/construction

Issue Description

Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.

Reason

The M0 board Flash Mode does not get activated from the Arduino IDE environment.

Workaround

Activate the Flash Mode before compiling your sketch.

To do so, PRESS TWICE the reset button.

ENG-CANSAT-FEATHER-M0-FORCING-FLASH.jpg

Once done, the Flash Mode is activated and the board will show itself as an USB Stick (Windows and other operating system does show a file navigation window).



Written by Meurisse D. from MC Hobby - License: CC-SA-BY.