Différences entre versions de « Hack-ENG-MotorSkin »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
(Page créée avec « {{Hack-ENG-MotorSkin-NAV}} == Présentation == La carte Motor-Skin permet de contrôler deux moteurs DC (dans les deux-sens), de quoi propulser facilement de petites pla... »)
 
 
(2 versions intermédiaires par le même utilisateur non affichées)
Ligne 1 : Ligne 1 :
 
{{Hack-ENG-MotorSkin-NAV}}
 
{{Hack-ENG-MotorSkin-NAV}}
  
== Présentation ==
+
== Presentation ==
  
La carte Motor-Skin permet de contrôler deux moteurs DC (dans les deux-sens), de quoi propulser facilement de petites plateformes robotiques tels que notre [http://shop.mchobby.be/product.php?id_product=741 kit deux roues].  
+
The Motor-Skin board help you to take the controle of two DC motors (backward and forward). With this, you can easily create a small robotic plateform with few additional material like our  [http://shop.mchobby.be/product.php?id_product=741 2 wheels kit].  
  
 
[[Fichier:Hack-MotorSkin-00.jpg|640px]]
 
[[Fichier:Hack-MotorSkin-00.jpg|640px]]
  
Le motor skin est le résultat de notre premier projet "[http://arduino103.blogspot.be/2016/02/pyboard-roulette-utilisation-dun.html PyBoard à Roulette]" (blog de MCHobby) il est donc idéal pour faciliter les raccordement et le pilotage d'une plateforme robotique avec deux moteurs continus.
+
The motor skin is the result of our first former project named "[http://arduino103.blogspot.be/2016/02/pyboard-roulette-utilisation-dun.html PyBoard à Roulette]" (blog de MCHobby). Motor-Skin is suited to ease the wiring and driving of 2 wheels DC motors robot.
  
 
[[Fichier:Hack-MotorSkin-01.jpg|640px]]
 
[[Fichier:Hack-MotorSkin-01.jpg|640px]]
  
Basé sur un L293D, vous pourrez facilement piloter deux moteurs dans les deux directions. Avec un {{pl|155|L293D}}, Vous disposez de 4 pont-H (H-Bridge) supportant 600mA par point (1.2A en pointe) avec protection thermique.
+
Based on a L293D, you will be able to drive two motors in the two directions. With a {{pl|155|L293D}}, you have 4 H-Bridge - each one being able to draw 600mA (1.2Amp peak current). The L293D does have an overheating protection.
  
Le pont-H fonctionne entre 4 et 25V (<font color="red">'''mais la tension est limitée à 10V max'''</font> étant donné qu'il faut aussi alimenter la PyBoard et le régulateur S7V7F5).
+
The HBride can work with voltage between 4 to 25V. <font color="red">'''However this voltage is limited to 10V max for the Motor-Skin'''</font> because it also power to the PyBoard and the S7V7F5 regulator.
  
== Disponible en deux versions ==
+
== Available in two flavors ==
Le Motor-Skin est disponible en deux versions:
+
The Motor-Skin is available in two flavors:
* {{pl|918|Motor Skin Basic Kit}}: Un kit de base
+
* {{pl|918|Motor Skin Basic Kit}}: a basic kit  
* {{pl|943|Motor Skin Kit}}: Un kit plus complet avec un senseur de distance ultrason et un regulateur de tension step-up/step-down
+
* {{pl|943|Motor Skin Kit}}: an enhanced kit including ultrasonic sensor and step-up/step-down voltage regulator
  
  
 
{{Hack-ENG-MotorSkin-TRAILER}}
 
{{Hack-ENG-MotorSkin-TRAILER}}

Version actuelle datée du 6 novembre 2016 à 19:42


MCHobby invest time and money to produce documentation and tutorials. It is a very long work made in the Open-Source spirit... so available for free to everyone.
IF you do like our documentation THEN help us by buying your products at MCHobby.

Presentation

The Motor-Skin board help you to take the controle of two DC motors (backward and forward). With this, you can easily create a small robotic plateform with few additional material like our 2 wheels kit.

Hack-MotorSkin-00.jpg

The motor skin is the result of our first former project named "PyBoard à Roulette" (blog de MCHobby). Motor-Skin is suited to ease the wiring and driving of 2 wheels DC motors robot.

Hack-MotorSkin-01.jpg

Based on a L293D, you will be able to drive two motors in the two directions. With a L293D, you have 4 H-Bridge - each one being able to draw 600mA (1.2Amp peak current). The L293D does have an overheating protection.

The HBride can work with voltage between 4 to 25V. However this voltage is limited to 10V max for the Motor-Skin because it also power to the PyBoard and the S7V7F5 regulator.

Available in two flavors

The Motor-Skin is available in two flavors:




Créé par Meurisse D. pour MCHobby.be - Created by Meurisse D. for MCHobby.be

Every reference, text extract of this document should be accompagned with the following credit text : «  produced/translated by MCHobby (www.MCHobby.be) - shop for kit and componants » together with a link to the source (so this page). The credit text must be applied on every type of media.

The commercial usage of this text/translation/project's content may be subject to royality fee. In every use case, you must also have the agreement of the initial owner (concerns translation work and content reuse)