Modifications
Sauter à la navigation
Sauter à la recherche
← Modification précédente
Modification suivante →
ENG-CANSAT-MISSION1-CAPTURE
(voir la source)
Version du 28 octobre 2018 à 14:33
354 octets ajoutés
,
28 octobre 2018 à 14:33
→Wire the BMP280 sensor
Ligne 7 :
Ligne 7 :
And transmissing the information via the RFM69HCW radio module.
And transmissing the information via the RFM69HCW radio module.
−
=== Wire the
BMP280
sensor ===
+
=== Wire the
barometric
sensor ===
The BMP280 is wired on the I2C bus of the Feather.
The BMP280 is wired on the I2C bus of the Feather.
[[Fichier:ENG-CANSAT-BMP280-wiring.png|320px]]
[[Fichier:ENG-CANSAT-BMP280-wiring.png|320px]]
+
=== Wire the temperature sensor ===
+
Connect the TMP36 sensor as follows:
+
* The pin 1 (on the left) to a power source (3.3V),
+
* The pin 3 (the the right droite) to the ground/GND.
+
* The pin 2 (middle one) to the A3 analogue input.
+
+
[[Fichier:ENG-CANSAT-TMP36-01.png|480px]]
+
+
=== Wire the radio module ===
+
Finally wire the RFM69HCW radio as follows:
{{ENG-CANSAT-TRAILER}}
{{ENG-CANSAT-TRAILER}}
Admin
Bureaucrates
,
Administrateurs
29 918
modifications
Menu de navigation
Outils personnels
Se connecter
Espaces de noms
Page
Discussion
Variantes
Affichages
Lire
Voir le texte source
Voir l’historique
Plus
Rechercher
Navigation
ARDUINO
RASPBERRY-PI
[:: PI Hacking ::]
Particle.IO
Micro Python
Imprimante 3D
Actualités
Modifications récentes
Page au hasard
Aide
Outils
Pages spéciales
Version imprimable