Différences entre versions de « ENG-CANSAT-V2-PICO-SHOPPING »
Sauter à la navigation
Sauter à la recherche
| Ligne 121 : | Ligne 121 : | ||
|link=http://shop.mchobby.be/product.php?id_product=1118 | |link=http://shop.mchobby.be/product.php?id_product=1118 | ||
|qty=0 | |qty=0 | ||
| + | }} | ||
| + | |||
| + | {{parts-item | ||
| + | |name=BME280-3V3 – Barometric pressure sensor | ||
| + | |descr=Easily evaluate pressure, altitude, temperature and '''relative humidity'''. This board expose a StemmaQt connector. | ||
| + | |img=BME280-3V3.jpg | ||
| + | |link=https://shop.mchobby.be/product.php?id_product=2861 | ||
| + | |qty=1 | ||
}} | }} | ||
Version du 4 octobre 2025 à 13:12
| Description | Quantité | |
Raspberry-Pi Pico
|
The Pico is a dual core microcontroler that can be programmed in C and Python. disponible ici chez MCHobby |
0 |
| Kit CanSat V2 with Raspberry-Pi Pico 250px |
A ready to use boards kit for CanSat and the Pico disponible ici chez MCHobby |
0 |
Base for Cansat V2
|
Base board for Cansat V2 disponible ici chez MCHobby |
0 |
Pico MCU board for Cansat V2
|
PICO MCU adapter board for Cansat V2 disponible ici chez MCHobby |
0 |
Pico Cansat Proto
|
Prototyping board for CanSat V2 (also named Lettuce) disponible ici chez MCHobby |
0 |
Cansat Parachute Board
|
Parachute board for cansat V2 (also named Bun) disponible ici chez MCHobby |
0 |
Cansat Armature
|
Armature board for cansat V2 (also named onion) disponible ici chez MCHobby |
0 |
433Mhz-ANT-SMA
|
433 Mhz antenna with SMA connector. disponible ici chez MCHobby |
0 |
uFL-to-SMA
|
antenna connector adapter µFl to SMA. disponible ici chez MCHobby |
0 |
RFM69HCW 433MHz boot
|
RFM69HCW 433 MHz Extension board for Raspberry-Pi Pico. disponible ici chez MCHobby |
0 |
CON-SMA-PCB-ANT
|
SMA connector for PCB (used with RFM69HCW Boot). disponible ici chez MCHobby |
0 |
JST-SH fast connexion wire
|
This 100mm wire can be used to connect Qwiic or StemmaQt board to the Pico in a snap disponible ici chez MCHobby |
0 |
Grove to Male pin wire
|
A great wire adapter to prototype/test electronic from grove connector. disponible ici chez MCHobby |
0 |
USB A/microB 1m cable
|
Can be used to plug your feather on a computer to program it or to reload the Lipo. disponible ici chez MCHobby |
0 |
BMP280 Barometric pressure sensor
|
Easily evaluate pressure, altitude and temperature. disponible ici chez MCHobby |
0 |
BME280-3V3 – Barometric pressure sensor
|
Easily evaluate pressure, altitude, temperature and relative humidity. This board expose a StemmaQt connector. disponible ici chez MCHobby |
1 |
TMP36 – analog temperature sensor
|
Transform the sensor voltage read on analog input into an easy-to-read temperature. disponible ici chez MCHobby |
0 |
Lithium Polymer Battery 0.8 Ah
|
Transform the Feather into an autonomous plateform with this 800mAh Lipo. Less power, smaller and lighter. disponible ici chez MCHobby |
0 |
Lithium Polymer Battery 1.3 Ah
|
Transform the Feather into an autonomous plateform with this 1300mAh Lipo. More power but bigger and bit heavier. disponible ici chez MCHobby |
0 |
Half Size Breadboard
|
Solderless breadboard are used for fast prototyping. disponible ici chez MCHobby |
0 |
Multi-functional breadboard wires
|
Set of wires with plug that can be modified from female to male. disponible ici chez MCHobby |
0 |
M2.5 Nut for Cansat
|
Nuts compatible with Cansat kit disponible ici chez MCHobby |
0 |
M2.5 Washer for Cansat
|
Washer compatible with Cansat kit disponible ici chez MCHobby |
0 |
M2.5 Threaded Rod for Cansat
|
Threaded rod for Cansat kit disponible ici chez MCHobby |
0 |
Written by Meurisse D. for MCHobby