MicroPython-Hack-Outil

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche


MCHobby investit du temps et de l'argent dans la réalisation de traduction et/ou documentation. C'est un travail long et fastidieux réalisé dans l'esprit Open-Source... donc gratuit et librement accessible.
SI vous aimez nos traductions et documentations ALORS aidez nous à en produire plus en achetant vos produits chez MCHobby.
Page-under-construction.pngPage(s) en cours de traduction/élaboration.

Page(s) under translation/construction

Utiliser la carte PyBoard

When plugged into a USB port of a computer, the pyboard appears as a disk. You can edit the main.py file on this disk, then eject it, and press the RST button on the pyboard to reboot it and execute main.py.

However, there is a more interactive way of playing with the pyboard which has a REPL (Read-Eval-Print Loop). For this, you need to connect to the /dev/ttyACM0 (Linux) or /dev/tty.usbmodemXXXX (MacOS) using a serial communication program. The Unix screen command works fine, but I prefer to use minicom.

pyterm.py

The following script, which I use to call pyterm.py, will connect to a plugged pyboard using minicom:

#!/usr/bin/python
import sys
import os
import fnmatch
 
"""
Usage: pyterm [device]
Calls minicom on "device". If device is not given, looks for /dev/ttyACM* devices
(the name of the pyboard under Linux) or /dev/tty.usbmodem* devices (name of the
pyboard under MacOS).
"""
def main():
    if len(sys.argv) > 1:
        ttymodems = [sys.argv[1]]
    else:
        ttymodems = fnmatch.filter(os.listdir('/dev'), 'ttyACM*')
        if len(ttymodems) == 0:
            ttymodems = fnmatch.filter(os.listdir('/dev'), 'tty.usbmodem*')
        if len(ttymodems) == 0:
            print('Error: no pyboard found.')
            sys.exit(1)
        ttymodems[0] = '/dev/' + ttymodems[0]
    os.system('minicom -D '+ttymodems[0])
 
if __name__ == "__main__":
    main()

Avec le script pyterm.py, vous pouvez démarrer une session avec la commande ./pyterm.py /dev/ttyACM1 ou /dev/ttyACM1 est le périphérique correspondant à votre pyboard.

Once connected, you can type Python commands and discover many possibilities of the pyboard. For instance:

led = pyb.LED(1)
led.on()

will turn on the red LED on the pyboard.

led = pyb.LED(1)
def blink(timer):
  led.toggle()
tim = pyb.Timer(4, freq=2, callback=blink)

will make the red LED blink at 1Hz (it is toggled on/off at 2Hz).

Charger du code sur le PyBoard

For writing more complex code, there are two possibilities:

  1. edit the files on the pyboard, and load them into the REPL using import
  2. edit the files on your computer, and paste them into the REPL

The first solution works fine and is the only way to work with code that is split into different modules.

The second solution is perhaps easier, but you cannot paste too much text in the REPL without getting errors. You have to switch to the raw REPL by hitting Ctrl-A, pasting your code, and hitting Ctrl-D to finish the transfer. Your code will be running on the pyboard. Hit Ctrl-C to kill it if it does note terminate by itself, then hit Ctrl-B to exit the raw REPL and switch back to the friendly REPL. You can perform a soft reset of the pyboard by hitting Ctrl-D.

Note than when using minicom, you have to hit Ctrl-A twice to send a Ctrl-A to the REPL because Ctrl-A is by default the escape key of minicom. You can use the paste file command in minicom to send a file to the REPL. For this:

  1. hit Ctrl-A twice to enter the raw REPL
  2. hit Ctrl-A Y to execute the paste file minicom command
  3. navigate to your file in the file selection screen that appears and select it
  4. hit Ctrl-D to finish the transfer

Your file is then loaded. If it contains just definitions, hit Ctrl-B to exit the rawREPL and use the definitions in the regular REPL.

pyboard.py

Another way of executing code on the pyboard is to use the pyboard.py script available in the tools directory of the MicroPython git repository. Exit minicom with Ctrl-A X, then load your file onto the pyboard with pyboard.py file_to_load.py. You can connect to the REPL by launching minicom again.

You can modify the pyboard.py script to find the pyboard device automatically by changing the beginning of the main function as follows:

def main():
    import argparse
    import os
    import fnmatch
    ttymodems = fnmatch.filter(os.listdir('/dev'), 'ttyACM*')
    if len(ttymodems) == 0:
        ttymodems = fnmatch.filter(os.listdir('/dev'), 'tty.usbmodem*')
    if len(ttymodems) == 0:
        print('Error: no pyboard found.')
        sys.exit(1) 
    cmd_parser = argparse.ArgumentParser(description='Run scripts on the pyboard.')
    cmd_parser.add_argument('--device', default='/dev/' + ttymodems[0], help='the serial device of the pyboard')

An already patched version (may not be up to date with respect to the git repository) is available.

Si vous desirez utiliser le script original du script, la commande à utiliser pour charger votre fichier mon_fichier.py sur ma pyboard est {{{1}}} . /dev/ttyACM1 correspond à la connexion série associée à votre PyBoard.

Element Fritzing

I use Fritzing to draw my sketches. I have made a Fritzing part for the pyboard. You can also get the SVG pictures I made for the PCB, the schematics and the icon.

You can see how it looks on the example below:

Source et autorisation de traduction

Le contenu de cette page est une traduction de l'article MicroPython de Mr Boulanger sur CentaleSupélec. Traduit avec l'aimable autorisation de Mr Boulanger.

Vous pouvez retrouver l'article original sur http://wdi.supelec.fr/boulanger/MicroPython/

MicroPython-Hack-Outil-01.png
Source: Supelec.fr



Source: Micro Python Intro écrit par/written by Damien P.George

Traduit par Meurisse D. pour MCHobby.be - Translated by Meurisse D. for MCHobby.be

Toute référence, mention ou extrait de cette traduction doit être explicitement accompagné du texte suivant : «  Traduction par MCHobby (www.MCHobby.be) - Vente de kit et composants » avec un lien vers la source (donc cette page) et ce quelque soit le média utilisé.

L'utilisation commercial de la traduction (texte) et/ou réalisation, même partielle, pourrait être soumis à redevance. Dans tous les cas de figures, vous devez également obtenir l'accord du(des) détenteur initial des droits. Celui de MC Hobby s'arrêtant au travail de traduction proprement dit.

Traduit avec l'autorisation de micropython.org - Translated with the authorisation of micropython.org