ENG-CANSAT-FEATHER-M0-FORCING-FLASH
En cours de traduction/élaboration. |
Issue Description
Sometime, it happens that compilation phase get complete successfully but the binary can't get uploaded to the board.
Reason
The M0 board Flash Mode does not get activated from the Arduino IDE environment.
Workaround
Activate the Flash Mode before compiling your sketch.
To do so, PRESS TWICE the reset button.
Once done, the Flash Mode is activated and the board will show itself as an USB Stick (Windows and other operating system does show a file navigation window).
Written by Meurisse D. from MC Hobby - License: CC-SA-BY.