Spark-Core-TechInfo
En cours de traduction/élaboration. |
Organisation de la mémoire
Flash Interne - Mapping Mémoire
The STM32 has a total of 128KB internal flash memory which is divided into three main regions by us. Beginning at the top of the memory space is where the bootloader is saved and locked. The second region is reserved for storing system flags and the third region holds the actual user firmware.
Adresse | Contenu | Taille |
0x08000000 | Bootloader | 19 KB max |
0x08004C00 | System Flags, Drapeaux systèmes |
1 KB max |
0x08005000 | Core Firmware Location | 108 KB max |
Flash Externe - Mapping Mémoire
The external flash memory gives us an additional 2MB of storage space. This space is used to store the public and private keys, the factory reset firmware, a back-up firmware and a copy of the firmware sent Over The Air (OTA). The rest of the memory space is available to the user.
Adresse | Contenu | Taille |
0x00000 | Réservé | 4KB |
0x01000 | Public Key Clé publique |
294 Bytes - 4KB max |
0x02000 | Private Key Clé privée |
612 Bytes |
0x20000 | Factory Reset Firmware Location Firmware d'usine pour réinitialisation |
128 KB max |
0x40000 | BackUp Firmware Location Copie de sécurité du Firmware |
128 KB max |
0x60000 | OTA Firmware Location Firmware téléchargé par Wifi |
128 KB max |
0x80000 | Fin du Firmware OTA | |
NON UTILISE | ||
0x200000 | Fin de la mémoire Flash. |
Caractéristiques électriques
Alimentation
Paramètre | Min | Max |
Tension d'entrée (sur VIN) | 3.6 V | 6.0 V |
Courant - consommation totale | 50mA | 300mA |
Courant - en veille avancée (Deep Sleep) | 3.2 μA | - |
Courant par broche I/O | 8mA | 20mA |
Radio Fréquence
Crédit: Particle.IO www.particle.io
With the on board chip antenna, the peak return loss (S11) has been measured and verified to be in the excess of 20dB.
The transmission loss for the u.FL connector has been measured to be approximately 0.5 to 0.75dB.
Les types de Core
Currently the Core is available in two flavors. With an on-board chip antenna or an uFL connector to connect an external antenna.
Avec antenne intégrée
This version of the Core comes with an on board chip antenna that gives a signal strength similar to a mobile phone. In most cases, a simple plastic enclosure will not affect the signal strength of the chip antenna.
Crédit: Particle.IO www.particle.io
Avec connecteur uFL
If you want to improve the signal strength of the Core, you can connect an external antenna with the help of the connecteur uFL (micro FL) (Wikipedia, anglais). Most antennas that are designed to operate at 2.4GHz or are WiFi rated will do the job. You can also make your own cantenna!
Crédit: Particle.IO www.particle.io
Cantenna est une antenne à base d'une boite de conserve dont bon marché mais aussi avec une meilleure portée. En anglais, ce type de boite s’appelle can et une antenne antenna d'où le petit jeu de mot "Cantenna" ;-) )!
Encombrement
The header pins on the Core are spaced at an interval of 0.1", which is the standard pitch size for proto-boards and breadboards. The physical layout of the Core was inspired from the carte Arduino Pro Mini .
Mechanical drawings of the Core are available here.
Paramètre | Valeur |
Length | 37.34mm |
Width | 20.32mm |
Height | 12.7mm |
Weight | 14 gr |
Source: Particle Core Hardware créé par Particle.IO.
Traduction réalisée par Meurisse D pour MCHobby.be - Translated by Meurisse D. for MCHobby.be
Traduit avec l'autorisation de Spark.IO - Translated with the permission from Particle.IO - Particle.IO
Toute référence, mention ou extrait de cette traduction doit être explicitement accompagné du texte suivant : « Traduction par MCHobby (www.MCHobby.be) - Vente de kit et composants » avec un lien vers la source (donc cette page) et ce quelque soit le média utilisé.
L'utilisation commercial de la traduction (texte) et/ou réalisation, même partielle, pourrait être soumis à redevance. Dans tous les cas de figures, vous devez également obtenir l'accord du(des) détenteur initial des droits. Celui de MC Hobby s'arrêtant au travail de traduction proprement dit.