ENG-CANSAT-PICO-ASSEMBLY
Abstract
This tutorial can be conduct with your own source of materials.
If by any chance you have a Cansat Pico Kit, you do have the needed material but also additional boards to pre-assemble a CANSAT objet.
This section contains recommandations and tips to follow to quickly assemble your kit and be ready to work within 10 to 15 minutes.
Raspberry-Pi Pico Soldering
The Pico is the MicroControler propeling the board.
 | Page(s) en cours de traduction/élaboration. Page(s) under translation/construction |
PowerBoost 500 Charger Soldering
The PowerBoost 500 is the default powering system of this kit.
| | Page(s) en cours de traduction/élaboration. Page(s) under translation/construction |
PowerBoost 1000 Charger Soldering
The PowerBoost 500 of the kit can be replaced with a PowerBoost 1000 to get more power (1000mA) from the Lipo battery
| | Page(s) en cours de traduction/élaboration. Page(s) under translation/construction |
RFM69HCW Soldering
The RFM69HWC is the radio module used in the CanSat-Pico kit to transmit data
| | Page(s) en cours de traduction/élaboration. Page(s) under translation/construction |
Written by Meurisse D. for MCHobby