ENG-CANSAT-V2-PICO-SHOPPING

De MCHobby - Wiki
Révision datée du 25 août 2025 à 21:34 par Admin (discussion | contributions)
(diff) ← Version précédente | Voir la version actuelle (diff) | Version suivante → (diff)
Sauter à la navigation Sauter à la recherche
  Description Quantité
Raspberry-Pi Pico
Raspberry-Pi-Pico.png
The Pico is a dual core microcontroler that can be programmed in C and Python.
disponible ici chez MCHobby
0
Kit CanSat V2 with Raspberry-Pi Pico
250px
A ready to use boards kit for CanSat and the Pico
disponible ici chez MCHobby
0
Base for Cansat V2
PICO-CANSAT-BASE-V2.png
Base board for Cansat V2
disponible ici chez MCHobby
0
Pico MCU board for Cansat V2
CANSAT-PICO-MCU.png
PICO MCU adapter board for Cansat V2
disponible ici chez MCHobby
0
Pico Cansat Proto
PICO-CANSAT-LETTUCE-V2.png
Prototyping board for CanSat V2 (also named Lettuce)
disponible ici chez MCHobby
0
Cansat Parachute Board
PICO-CANSAT-BUN-V2.png
Parachute board for cansat V2 (also named Bun)
disponible ici chez MCHobby
0
Cansat Armature
Cansat-V2-Armature-Board.png
Armature board for cansat V2 (also named onion)
disponible ici chez MCHobby
0
433Mhz-ANT-SMA
433Mhz-ANT-SMA.png
433 Mhz antenna with SMA connector.
disponible ici chez MCHobby
0
uFL-to-SMA
UFL-to-SMA.png
antenna connector adapter µFl to SMA.
disponible ici chez MCHobby
0
RFM69HCW 433MHz boot
PICO-RFM69-433-BOOT.png
RFM69HCW 433 MHz Extension board for Raspberry-Pi Pico.
disponible ici chez MCHobby
0
CON-SMA-PCB-ANT
CON-SMA-PCB-ANT.png
SMA connector for PCB (used with RFM69HCW Boot).
disponible ici chez MCHobby
0
JST-SH fast connexion wire
FIL-JSTSH4-100mm.png
This 100mm wire can be used to connect Qwiic or StemmaQt board to the Pico in a snap
disponible ici chez MCHobby
0
Grove to Male pin wire
FIL-GRO-TO-MALE.png
A great wire adapter to prototype/test electronic from grove connector.
disponible ici chez MCHobby
0
USB A/microB 1m cable
CABLE-USB-MICRO.png
Can be used to plug your feather on a computer to program it or to reload the Lipo.
disponible ici chez MCHobby
0
BMP280 Barometric pressure sensor
BMP280v2.png
Easily evaluate pressure, altitude and temperature.
disponible ici chez MCHobby
0
TMP36 – analog temperature sensor
TMP-36.png
Transform the sensor voltage read on analog input into an easy-to-read temperature.
disponible ici chez MCHobby
0
Lithium Polymer Battery 0.8 Ah
ACC-LIPO-800mAh.png
Transform the Feather into an autonomous plateform with this 800mAh Lipo.
Less power, smaller and lighter.
disponible ici chez MCHobby
0
Lithium Polymer Battery 1.3 Ah
ACC-LIPO-1.3Ah.png
Transform the Feather into an autonomous plateform with this 1300mAh Lipo.
More power but bigger and bit heavier.
disponible ici chez MCHobby
0
Half Size Breadboard
BB-DEMI.jpg
Solderless breadboard are used for fast prototyping.
disponible ici chez MCHobby
0
Multi-functional breadboard wires
FILS-BB-FFASSOR-v2.png
Set of wires with plug that can be modified from female to male.
disponible ici chez MCHobby
0
M2.5 Nut for Cansat
Cansat-M2.5-Nuts.png
Nuts compatible with Cansat kit
disponible ici chez MCHobby
0
M2.5 Washer for Cansat
Cansat-M2.5-Washer.png
Washer compatible with Cansat kit
disponible ici chez MCHobby
0
M2.5 Threaded Rod for Cansat
Cansat-M2.5-rood.png
Threaded rod for Cansat kit
disponible ici chez MCHobby
0

Written by Meurisse D. for MCHobby


MCHobby investit du temps et de l'argent dans la réalisation de traduction et/ou documentation. C'est un travail long et fastidieux réalisé dans l'esprit Open-Source... donc gratuit et librement accessible.
SI vous aimez nos traductions et documentations ALORS aidez nous à en produire plus en achetant vos produits chez MCHobby.