Différences entre versions de « ENG-CANSAT-3D »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
Ligne 19 : Ligne 19 :
 
This can have 3mm wall thickness which offer a good balance between we firmness, available space and weight.
 
This can have 3mm wall thickness which offer a good balance between we firmness, available space and weight.
  
[[Fichier:ENG-CANSAT-3D-11.png]]
+
[[Fichier:ENG-CANSAT-3D-11.png|100px]]
  
 
=== Cansat_1.0 ===
 
=== Cansat_1.0 ===
Ligne 26 : Ligne 26 :
 
This model did fly at Elsenborn.
 
This model did fly at Elsenborn.
  
[[Fichier:ENG-CANSAT-3D-10.png]]
+
[[Fichier:ENG-CANSAT-3D-10.png|100px]]
  
 
=== Cansat_2.0 ===
 
=== Cansat_2.0 ===
Ligne 37 : Ligne 37 :
 
This model have been used for CanSat Europe (Açores).
 
This model have been used for CanSat Europe (Açores).
  
[[Fichier:ENG-CANSAT-3D-12.png]] [[Fichier:ENG-CANSAT-3D-13.png]]
+
[[Fichier:ENG-CANSAT-3D-12.png|100px]] [[Fichier:ENG-CANSAT-3D-13.png|100px]]
  
 
{{ENG-CANSAT-TRAILER}}
 
{{ENG-CANSAT-TRAILER}}

Version du 30 octobre 2018 à 20:15

Introduction

The entire project must fit into a can! The size and dimensions are available in CanSat settlement.

If you need some help, this page contains various information to create this can.

3D CanSat

One of participant of the previous CanSat 2018 edition did share some 3D models.

Thank to Docopol from Institut Saint Michel for this contribution.

Cansat_BaseModel

This is a standard CanSat accredit on required dimension.

  • Diameter: 66mm.
  • Height: 115mm.

The hook firmness is good for the parachute.

This can have 3mm wall thickness which offer a good balance between we firmness, available space and weight.

ENG-CANSAT-3D-11.png

Cansat_1.0

This modeling is an upgrade of the previous one. It includes small edge to insert circular 59mm PCBs.

This model did fly at Elsenborn.

ENG-CANSAT-3D-10.png

Cansat_2.0

Composed of right and left part, this allows to use a vertical PCB.

The PCB size is 108mm height and 58mm weight.

An additional chamber can be used as ballast. Adding some load may be useful in some circumstance.

This model have been used for CanSat Europe (Açores).

ENG-CANSAT-3D-12.png ENG-CANSAT-3D-13.png


Written by Meurisse D. from MC Hobby - License: CC-SA-BY.