Différences entre versions de « ENG-CANSAT-ARDUINO »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
 
(12 versions intermédiaires par le même utilisateur non affichées)
Ligne 1 : Ligne 1 :
 
{{ENG-CANSAT-NAV}}
 
{{ENG-CANSAT-NAV}}
 +
{{infobox tuto
 +
  | image = FEATHER-M0-ArduinoIDE-Utiliser-04.png
 +
  | title = Arduino IDE for <br />Feather M0 Express
 +
  | subtitle = Install and configure the Arduino IDE environment to support development with the Feather M0 Express.
 +
  | version = 0.1
 +
}}
 +
== Getting prepared for a Training ==
 +
Installing the Arduino IDE environment + dependencies would involve more than 220 Mb download (100 Mb for Arduino, 120 Mb for Arduino SAMD support, 20 Mb for Adafruit SAMD support).
 +
 +
It is important to get prepared before the training. It is not possible to rely on the guest network to download such amount of data for each of the participant.
 +
 +
So, if you intend to follow a training, get prepared by downloading and installing the complete environment as suggested here follow.
  
 
== Install Arduino IDE (the .CC version) ==
 
== Install Arduino IDE (the .CC version) ==
Ligne 23 : Ligne 35 :
 
If you want to know the Arduino IDE's supported boards then browse [https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls the list of URLs of managed boards] (Arduino Wiki page).  
 
If you want to know the Arduino IDE's supported boards then browse [https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls#list-of-3rd-party-boards-support-urls the list of URLs of managed boards] (Arduino Wiki page).  
  
For this board, we only need to add a single URL. However, it is possible to add several URLs separated by a coma.  
+
For this Feather M0 Express, we only need to add a single URL. However, it is possible to add several URLs separated by a coma.  
  
 
Copy/paste the link here below in the field '''Additional Boards Manager URLs''' (of the Arduino IDE "preference" window).
 
Copy/paste the link here below in the field '''Additional Boards Manager URLs''' (of the Arduino IDE "preference" window).
Ligne 52 : Ligne 64 :
 
Now, we will install the '''Arduino SAMD board''' version '''1.6.15''' or higher.
 
Now, we will install the '''Arduino SAMD board''' version '''1.6.15''' or higher.
  
You can type ib the '''Arduino SAMD''' in the search box to quickly find the package, then press the '''Install''' button.
+
You can type in the '''Arduino SAMD''' in the search box to quickly find the package, then press the '''Install''' button.
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-02.png|640px}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-02.png|640px}}
Ligne 66 : Ligne 78 :
  
 
=== Check installed boards ===
 
=== Check installed boards ===
'''Quittez et réouvez Arduino IDE''' pour vous assurer que toutes les cartes sont correctement installées. Vous devriez être capable de sélectionner de nouvelles cartes (et téléverser du code) vers les nouvelles cartes accessible dans le menu '''Outils -> Carte''' (''Tools -> Board'').
+
'''Once the Arduino IDE restarted''' to be sure that boards are properly installed, you should be able to select the new boards in the interfaces (and to  upload code) via the menu ''Tools -> Board''.
  
Sélectionnez la carte correspondante à votre achat, les options sont actuellement:
+
Select the board for the kit among those now available:
* '''Feather M0''' (pour toutes les cartes Feather M0 autre que l'Express)
+
* Feather M0 (for the Feather M0 boards other than Feather M0 Express)
 
* '''Feather M0 Express'''
 
* '''Feather M0 Express'''
* '''Metro M0 Express'''
+
* Metro M0 Express
* '''Circuit Playground Express'''
+
* Circuit Playground Express
* '''Gemma M0'''
+
* Gemma M0
* '''Trinket M0'''
+
* Trinket M0
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-04.png|640px}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-04.png|640px}}
Ligne 81 : Ligne 93 :
 
{{ambox-stop|text=If you are using WINDOWS then you should have a look to the "Windows Driver" section here below!}}
 
{{ambox-stop|text=If you are using WINDOWS then you should have a look to the "Windows Driver" section here below!}}
  
Nous pouvons maintenant téléverser notre premier croquis "blink"!
+
Now, we can upload your first sketch to the board (the "blink" sketch)!
  
Brancher votre Gemma M0, Trinket M0, Metro M0 ou Feather M0 et attendez qu'il soit reconnu par le système d'exploitation (cela devrait prendre quelques secondes). Une fois reconnu, cela créera un port série/COM que vous pourrez sélectionner dans dans la liste déroulante (il devrait même être 'mentionné' un Trinket/Gemma/Metro/Feather M0!)
+
Wire your board to the computer and wait for the operating system to identify it (this may take few seconds). Once identified, the Serial port/COM is available in the list of serial port available.
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-09.png|640px}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-09.png|640px}}
  
Téléversez maintenant l'exemple Blink
+
It is now time to upload the Blink sketch
  
 
<syntaxhighlight lang="c">
 
<syntaxhighlight lang="c">
// fonction d'initialisation exécutée lorsque la
 
// plateforme est réinitialisée ou mise sous tension
 
 
void setup() {
 
void setup() {
   // initialiser la broche digitale 13 comme sortie.
+
   // init the digital pin #13 as OUTPUT
 
   pinMode(13, OUTPUT);
 
   pinMode(13, OUTPUT);
 
}
 
}
  
// La fonction "loop" est exécutée encore et encore (à l'infini)
+
// the "loop" function is executed again and again (in a infinite loop)
 
void loop() {
 
void loop() {
   digitalWrite(13, HIGH);  // allumer la LED (HIGH est le niveau haut)
+
   digitalWrite(13, HIGH);  // Light up the LED (HIGH level = 3.3v)
   delay(1000);              // attendre une seconde
+
   delay(1000);              // Wait 1 second
   digitalWrite(13, LOW);    // éteindre la LED off (LOW est le niveau bas)
+
   digitalWrite(13, LOW);    // Switch off the LED (LOW level = 0V)
   delay(1000);              // attendre une seconde
+
   delay(1000);              // Wait 1 second
 
}
 
}
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Et cliquez sur le bouton de téléversement! Vous devriez être capable de voir la LED clignoter. Vous pouvez adapter la vitesse du clignotement en modifiant la valeur du paramètre dans l'appel de fonction '''delay()'''.
+
Then click on the "upload" button! You should be able to see the board LED blinking. You can tune the blink speed by updating the value for the {{fname|delay()}} function.
  
{{ambox|text=Si vous rencontrez un problème de téléchargement assurez vous d'avoir sélectionné la carte correspondante au matériel utilisé.}}
+
{{ambox|text=If you get upload issue then you should check if you selected the proper board type.}}
  
 
== Install the Windows Driver (Win 7 only) ==
 
== Install the Windows Driver (Win 7 only) ==
Il est probable que vous ayez besoin d'installer des pilotes sous Windows lorsque vous branchez la carte.
+
You will certainly have to install Windows Driver before plugin the board on the computer.
  
Cliquez sur le bouton de téléchargement ci-dessous pour installer les pilotes Adafruit
+
You can download the Windows Driver from the Adafruit Industries server :
  
{{download-box|Télécharger l'installateur des Pilotes Adafruit v2.0.0.0|https://github.com/adafruit/Adafruit_Windows_Drivers/releases/download/2.0.0.0/adafruit_drivers_2.0.0.0.exe}}
+
{{download-box|Download the Adafruit Drivers v2.0.0.0|https://github.com/adafruit/Adafruit_Windows_Drivers/releases/download/2.0.0.0/adafruit_drivers_2.0.0.0.exe}}
  
Téléchargez et exécutez le programme d'installation
+
Download and start the setup software.
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-05.png}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-05.png}}
  
Exécutez le programme d'installation! Etant donné que le programme d'installation de SiLabs et pilotes FTDI, il sera nécessaire de passer les informations de licence en revue.
+
Execute the setup software! It will be necessary to review the licensing instruction as it contains the SiLabs setup and FTDI driver.
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-06.png}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-06.png}}
  
Sélectionnez le pilote que vous désirez installer, la sélection par défaut mettra en place tous les éléments nécessaire au fonctionnement des cartes Adafruit!
+
Select the driver you want to install, the default selection would be perfect for the Adafruit boards!
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-07.png}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-07.png}}
  
Cliuez sur le bouton '''Installer''' pour débuter l'installation.
+
Push the '''Install'' button to proceed.
  
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-08.png}}
 
{{ADFImage|FEATHER-M0-ArduinoIDE-Utiliser-08.png}}
  
 
{{ENG-CANSAT-TRAILER}}
 
{{ENG-CANSAT-TRAILER}}

Version actuelle datée du 3 novembre 2018 à 21:23

Getting prepared for a Training

Installing the Arduino IDE environment + dependencies would involve more than 220 Mb download (100 Mb for Arduino, 120 Mb for Arduino SAMD support, 20 Mb for Adafruit SAMD support).

It is important to get prepared before the training. It is not possible to rely on the guest network to download such amount of data for each of the participant.

So, if you intend to follow a training, get prepared by downloading and installing the complete environment as suggested here follow.

Install Arduino IDE (the .CC version)

As first operation, you have to install the Arduino IDE from Arduino.CC (not Arduino.ORG). To follow this guide, you must have the version 1.8 or higher.

Download-icon.pngArduino IDE Download

Register Additional Boards

Once the last version of Arduino IDE installed, open the IDE and select the Preference menu (available in the File menu for Windows and Linux --or-- under the Arduino menu for OS X).

FEATHER-M0-ArduinoIDE-01.png
Crédit: AdaFruit Industries www.adafruit.com

You should see a dialog box like the following.

FEATHER-M0-ArduinoIDE-02.png
Crédit: AdaFruit Industries www.adafruit.com

We will add an URL in the new option Additional Boards Manager URLs (the URL to handle additional boards).

This field contains an URL list (coma separated). Each new URL can only be added once in this list.

This new Adafruit's board and updates of existing boards will be collected by the "Board Manager" (each time you open it). The URLs point to the index files used by the board manager to build the list of the board available to download.

If you want to know the Arduino IDE's supported boards then browse the list of URLs of managed boards (Arduino Wiki page).

For this Feather M0 Express, we only need to add a single URL. However, it is possible to add several URLs separated by a coma.

Copy/paste the link here below in the field Additional Boards Manager URLs (of the Arduino IDE "preference" window).

https://adafruit.github.io/arduino-board-index/package_adafruit_index.json

FEATHER-M0-ArduinoIDE-03.png
Crédit: AdaFruit Industries www.adafruit.com

Here follows a small description of the boards available with the URLs:

  • Adafruit AVR Boards - support for Flora, Gemma, Feather 32u4, Trinket and Trinket Pro.
  • Adafruit SAMD Boards - support for the Feather M0, Metro M0, Circuit Playground Express, Gemma M0 and Trinket M0
  • Arduino Leonardo & Micro MIDI-USB - Add the MIDI over USB support for Flora, Feather 32u4, Micro & Leonardo (use the projet arcore).

Once the "OK" button pressed, the new preferences are saved.

We can now install the needed board into the Board Manager.

Install the Feather M0 board

Open the Boards Manager available via the menu Tools->Board .

FEATHER-M0-ArduinoIDE-Utiliser-01.png
Crédit: AdaFruit Industries www.adafruit.com

Once the Boards Manager opened, select the Contributed type. Once done, you will be able to install the board attached to package_adafruit_index.json URL.

Install the SAMD boards

Now, we will install the Arduino SAMD board version 1.6.15 or higher.

You can type in the Arduino SAMD in the search box to quickly find the package, then press the Install button.

FEATHER-M0-ArduinoIDE-Utiliser-02.png
Crédit: AdaFruit Industries www.adafruit.com

Install the ADAFRUIT SAMD board

After the SAMD board, it's time to install the "Adafruit SAMD" package to support the Adafruit boards.

You can type in the Adafruit SAMD in the search field to find the package. Once located, press the Install button.

FEATHER-M0-ArduinoIDE-Utiliser-03.png
Crédit: AdaFruit Industries www.adafruit.com

We strongly recommand to restart the Arduino IDE (it is not required but it is better to do it anyway).

Check installed boards

Once the Arduino IDE restarted to be sure that boards are properly installed, you should be able to select the new boards in the interfaces (and to upload code) via the menu Tools -> Board.

Select the board for the kit among those now available:

  • Feather M0 (for the Feather M0 boards other than Feather M0 Express)
  • Feather M0 Express
  • Metro M0 Express
  • Circuit Playground Express
  • Gemma M0
  • Trinket M0

FEATHER-M0-ArduinoIDE-Utiliser-04.png
Crédit: AdaFruit Industries www.adafruit.com

Test with BLINK

Now, we can upload your first sketch to the board (the "blink" sketch)!

Wire your board to the computer and wait for the operating system to identify it (this may take few seconds). Once identified, the Serial port/COM is available in the list of serial port available.

FEATHER-M0-ArduinoIDE-Utiliser-09.png
Crédit: AdaFruit Industries www.adafruit.com

It is now time to upload the Blink sketch

void setup() {
  // init the digital pin #13 as OUTPUT
  pinMode(13, OUTPUT);
}

// the "loop" function is executed again and again (in a infinite loop)
void loop() {
  digitalWrite(13, HIGH);   // Light up the LED (HIGH level = 3.3v)
  delay(1000);              // Wait 1 second
  digitalWrite(13, LOW);    // Switch off the LED (LOW level = 0V)
  delay(1000);              // Wait 1 second
}

Then click on the "upload" button! You should be able to see the board LED blinking. You can tune the blink speed by updating the value for the delay() function.

Install the Windows Driver (Win 7 only)

You will certainly have to install Windows Driver before plugin the board on the computer.

You can download the Windows Driver from the Adafruit Industries server :

Download-icon.pngDownload the Adafruit Drivers v2.0.0.0

Download and start the setup software.

{{{2}}}
Crédit: AdaFruit Industries www.adafruit.com

Execute the setup software! It will be necessary to review the licensing instruction as it contains the SiLabs setup and FTDI driver.

{{{2}}}
Crédit: AdaFruit Industries www.adafruit.com

Select the driver you want to install, the default selection would be perfect for the Adafruit boards!

{{{2}}}
Crédit: AdaFruit Industries www.adafruit.com

Push the 'Install button to proceed.

{{{2}}}
Crédit: AdaFruit Industries www.adafruit.com


Written by Meurisse D. from MC Hobby - License: CC-SA-BY.