Différences entre versions de « ENG-CANSAT-PICO-MISSION1-AUTONOMOUS »

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche
Ligne 73 : Ligne 73 :
 
# Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
 
# Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
 
# Disabling the PowerBoost (and power down the complete projet):
 
# Disabling the PowerBoost (and power down the complete projet):
* '''WITHOUT''' Cansat Kit: Use a slide switch (or a jumper) to tie the '''PowerBoost EN''' to the GND
+
#* '''WITHOUT''' Cansat Kit: Use a slide switch (or a jumper) to tie the '''PowerBoost EN''' to the GND
* '''With''' Cansat Kit: The slide switch (or jumper) can be placed near of the border of the board.
+
#* '''With''' Cansat Kit: The slide switch (or jumper) can be placed near of the border of the board.
  
 
[[Fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]
 
[[Fichier:ENG-CANSAT-PICO-CONTENT-14.jpg|640px]]

Version du 21 avril 2022 à 09:19

Introduction

Page-under-construction.pngPage(s) en cours de traduction/élaboration.

Page(s) under translation/construction

Until now, we have worked with the emitter linked to a computer via USB cable.

Using the USB cable was very useful to capture the debugging message into the REPL Session.

We have two things to do:

  • Start automatically your python script
  • Making the CANSAT working autonomously

Start your Python script

If you want your script to start when powering up your Pico, just copy the script content into a file named main.py .

This approach is very efficient but can lead to plateform lock-up when the script is buggy or contains an infinite loop.

The aim is to check the status of a given pin (eg: GP22) before starting the user script (say user.py).

In case of trouble during testing/development we just switch-off the "RunApp" and press the reset button to restart the Pico.

ENG-CANSAT-PICO-MISSION1-AUTONOMOUS.jpg

Here is the content of main.py script.

from machine import Pin
run = Pin( 22, Pin.IN, Pin.PULL_UP )
if run.value() == 1:
    import user # load user.py file and execute it

To resume:

  • If the RunApp switch is on the Run position at power-up the user.py script does start.
  • If the RunApp switch is on the Stop position at power-up the user.py script will not start.

Power It

To work autonomously, the CanSat must be powered with a battery. This point have been adressed with a Adafruit PowerBoost 500 breakout board:

PowerBoost-500-Chargeur-01.jpg
Crédit: AdaFruit Industries www.adafruit.com

The Adafruit PowerBoost 500 is a breakout board able:

  • to discharge a Lipo battery to generates 5V output (500mA max)
  • to charge the Lipo battery when connected to an external 5V supply
  • to do the both operations at the same time.

The great thing about the PowerBoost is that it can use the Pico VBUS to recharge the Lipo. So, no need of an external power connexion to refill the Lipo (just plug you Pico to an USB Power source).

All of this have been adressed with great details in the Pico Powering section.


Pico Powering

Tlogo-pico-power.jpg

How to properly power up your Pico

 

Sparing Power

The best approach to spare the energy is to consume the LiPo power as the last moment (to keept as must as power as possible for the launch).

There are several options for that:

  1. Keeping the Pico Powered via USB as much as possible (with a computer or a powerbank).
  2. Disabling the PowerBoost (and power down the complete projet):
    • WITHOUT Cansat Kit: Use a slide switch (or a jumper) to tie the PowerBoost EN to the GND
    • With Cansat Kit: The slide switch (or jumper) can be placed near of the border of the board.

ENG-CANSAT-PICO-CONTENT-14.jpg


Written by Meurisse D. for MCHobby


MCHobby investit du temps et de l'argent dans la réalisation de traduction et/ou documentation. C'est un travail long et fastidieux réalisé dans l'esprit Open-Source... donc gratuit et librement accessible.
SI vous aimez nos traductions et documentations ALORS aidez nous à en produire plus en achetant vos produits chez MCHobby.