Pololu-Romi-Chassis-Alimenter
Exploiter le bloc pile
En cours de traduction/élaboration. |
Le châssis Romi offre de plusieurs configuration d'alimentation à partir des piles. Le compartiment pile est séparé en deux compartiment: un emplacement 4 piles et un compartiment 2 piles. ces deux compartiments peuvent être utilisés indépendamment comme indiqué sur le diagramme ci-dessous indiquant les tensions nominales pour piles NiMH (et la masse commune):
Another option is to use all six batteries in series. To do this, simply solder a jumper wire from the negative terminal of the four-battery section to the positive terminal of the two-battery section as shown below:
If you use the "Power Distribution Board for Romi Chassis" lien pololu, it defaults to getting power from all six batteries, but it can be reconfigured to be powered from four cells; see the board’s product page for more information. |
Basé sur "Romi Chassis User’s Guide" de Pololu (https://www.pololu.com/docs/0J68) - Traduit en Français par shop.mchobby.be CC-BY-SA pour la traduction
Toute copie doit contenir ce crédit, lien vers cette page et la section "crédit de traduction". Traduit avec l'autorisation expresse de Pololu (www.pololu.com)
Based on "Romi Chassis User’s Guide" from Pololu (https://www.pololu.com/docs/0J68) - Translated to French by shop.mchobby.be CC-BY-SA for the translation
Copies must includes this credit, link to this page and the section "crédit de traduction" (translation credit). Translated with the Pololu's authorization (www.pololu.com)