Différences entre versions de « ENG-CANSAT-PICO-ASSEMBLY »
Sauter à la navigation
Sauter à la recherche
(Page créée avec « {{ENG-CANSAT-PICO-NAV}} == Abstract == This tutorial can be conduct with your own source of materials. If by any chance you have a {{pl|2271|Cansat Pico Kit}}, you do ha… ») |
|||
| Ligne 8 : | Ligne 8 : | ||
This section contains recommandations and tips to follow to quickly assemble your kit and be ready to work within 10 to 15 minutes. | This section contains recommandations and tips to follow to quickly assemble your kit and be ready to work within 10 to 15 minutes. | ||
| − | == | + | == Raspberry-Pi Pico Soldering == |
| + | The Pico is the MicroControler propeling the board. | ||
| + | |||
| + | {{traduction}} | ||
| + | |||
| + | == PowerBoost 500 Charger Soldering == | ||
| + | |||
| + | The PowerBoost 500 is the default powering system of this kit. | ||
| + | |||
| + | {{traduction}} | ||
| + | |||
| + | == PowerBoost 1000 Charger Soldering == | ||
| + | |||
| + | The PowerBoost 500 of the kit can be replaced with a PowerBoost 1000 to get more power (1000mA) from the Lipo battery | ||
| + | |||
| + | {{traduction}} | ||
| + | |||
| + | == RFM69HCW Soldering == | ||
| + | The RFM69HWC is the radio module used in the CanSat-Pico kit to transmit data | ||
| + | |||
| + | {{traduction}} | ||
{{ENG-CANSAT-PICO-TRAILER}} | {{ENG-CANSAT-PICO-TRAILER}} | ||
Version du 13 mai 2022 à 16:00
Abstract
This tutorial can be conduct with your own source of materials.
If by any chance you have a Cansat Pico Kit, you do have the needed material but also additional boards to pre-assemble a CANSAT objet.
This section contains recommandations and tips to follow to quickly assemble your kit and be ready to work within 10 to 15 minutes.
Raspberry-Pi Pico Soldering
The Pico is the MicroControler propeling the board.
 |
En cours de traduction/élaboration. |
PowerBoost 500 Charger Soldering
The PowerBoost 500 is the default powering system of this kit.
|
|
En cours de traduction/élaboration. |
PowerBoost 1000 Charger Soldering
The PowerBoost 500 of the kit can be replaced with a PowerBoost 1000 to get more power (1000mA) from the Lipo battery
|
|
En cours de traduction/élaboration. |
RFM69HCW Soldering
The RFM69HWC is the radio module used in the CanSat-Pico kit to transmit data
|
|
En cours de traduction/élaboration. |
Written by Meurisse D. for MCHobby