ENG-CANSAT-PICO-MISSION1-AUTONOMOUS

De MCHobby - Wiki
Sauter à la navigation Sauter à la recherche

Inroduction

  En cours de traduction/élaboration.

Until now, we have worked with the emitter linked to a computer via USB cable.

Using the USB cable was very useful to capture the debugging message into the REPL Session.

We have two things to do:

  • Start automatically your python script
  • Making the CANSAT working autonomously

Start your Python script

If you want your script to start when powering up your Pico, just copy the script content into a file named main.py .

This approach is very efficient but can lead to plateform lock-up when the script is buggy or contains an infinite loop.

At MCHobby we do use a slide switch name "RunApp" as recovery method.

The aim is to check the status of a given pin (eg: GP22) before starting the user script (say user.py).

In case of trouble during testing/development we just switch-off the "RunApp" and press the reset button to restart the Pico.

 


Written by Meurisse D. for MCHobby


MCHobby investit du temps et de l'argent dans la réalisation de traduction et/ou documentation. C'est un travail long et fastidieux réalisé dans l'esprit Open-Source... donc gratuit et librement accessible.
SI vous aimez nos traductions et documentations ALORS aidez nous à en produire plus en achetant vos produits chez MCHobby.
Récupérée de « https://wiki.mchobby.be/index.php?title=ENG-CANSAT-PICO-MISSION1-AUTONOMOUS&oldid=30607 »