Différences entre versions de « ENG-CANSAT-PICO-MISSION1-RECEIVE »
Sauter à la navigation
Sauter à la recherche
(Page créée avec « {{ENG-CANSAT-PICO-NAV}} == Introduction == The following wiring will prepare the Receiver "Base Station" for the mission 1. From the "RFM69HCW Testing" section, we will u… ») |
(→Wiring) |
||
| Ligne 7 : | Ligne 7 : | ||
== Wiring == | == Wiring == | ||
| + | Here how to wire the RFM69 module to the Raspberry-Pi Pico. | ||
| + | |||
| + | [[Fichier:ENG-CANSAT-PICO-RFM69HCW-to-Pico.jpg|640px]] | ||
| + | |||
| + | Here is the description of wiring between the Pico and the RFM69 module. | ||
| + | |||
| + | {| class="wikitable" | ||
| + | |- style="font-weight:bold;" | ||
| + | ! RFM69HCW | ||
| + | ! PICO | ||
| + | |- | ||
| + | | RST<br /> | ||
| + | | GP3 | ||
| + | |- | ||
| + | | CS | ||
| + | | GP5 (Slave Select) | ||
| + | |- | ||
| + | | MOSI | ||
| + | | GP7 (Miso) | ||
| + | |- | ||
| + | | MISO | ||
| + | | GP4 (Mosi) | ||
| + | |- | ||
| + | | SCK | ||
| + | | GP6 (Clock) | ||
| + | |- | ||
| + | | GND | ||
| + | | GND | ||
| + | |- | ||
| + | | VIN | ||
| + | | 3V3 | ||
| + | |} | ||
| + | |||
{{ENG-CANSAT-PICO-TRAILER}} | {{ENG-CANSAT-PICO-TRAILER}} | ||
Version du 6 mars 2022 à 20:20
Introduction
The following wiring will prepare the Receiver "Base Station" for the mission 1. From the "RFM69HCW Testing" section, we will use a Raspberry-Pico wired to a RFM69HCW module in order to capture the Radio Messages and redirect them the USB-Serial connection.
As such, we will be able to receive (and even store) the data sent by the CanSat emitter.
Wiring
Here how to wire the RFM69 module to the Raspberry-Pi Pico.
Here is the description of wiring between the Pico and the RFM69 module.
| RFM69HCW | PICO |
|---|---|
| RST |
GP3 |
| CS | GP5 (Slave Select) |
| MOSI | GP7 (Miso) |
| MISO | GP4 (Mosi) |
| SCK | GP6 (Clock) |
| GND | GND |
| VIN | 3V3 |
Written by Meurisse D. for MCHobby