Pololu-Zumo-Shield-Arduino
 |
En cours de traduction/élaboration. |
Le Zumo Shield offre une interface pratique entre le châssis Zumo lien pololu et un A-Star 32U4 Prime lien pololu, Arduino Uno lien pololu ou un Arduino Leonardo lien pololu (il n'est pas compatible avec un Arduino Mega ou Due mais il peut être utilisé avec de plus vieux Arduino qui disposent du même Form Factor qu'un Arduino Uno (comme le Duemilanove par exemple). The shield mounts directly to the chassis, connecting to its battery terminals and motors, and the Arduino plugs into the shield’s male header pins, face down. The shield provides all the electronics necessary to power the motors and includes some additional fun components for making a more interesting robot, such as a buzzer for making sounds and inertial sensors including an accelerometer and gyro.
A Zumo chassis, Zumo Shield, and Arduino (or compatible board) can be combined to become a low-profile, Arduino-controlled tracked robot that is less than 10 cm on each side (small enough to qualify for Mini-Sumo competitions).
The latest revision of the Zumo Shield is version 1.2. This version adds an L3GD20H lien pololu 3-axis gyroscope and upgrades the accelerometer and magnetometer chip to the newer LSM303D lien pololu. It is available by itself, as part of a kit, or in a complete robot:
- Zumo Shield, v1.2 lien pololu
- Zumo robot kit for Arduino, v1.2 lien pololu with a Zumo chassis lien pololu and a stainless steel Zumo blade lien pololu
- Zumo robot for Arduino, v1.2 lien pololu , fully assembled with moteurs 75:1 HP lien pololu and a reflectance sensor array lien pololu installed.
The information in this user’s guide also applies to the original Zumo Shield, which did not have a gyro and featured an LSM303DLHC lien pololu accelerometer and magnetometer:
- Zumo Shield lien pololu
- Zumo robot kit for Arduino lien pololu
- Zumo robot for Arduino lien pololu
Basé sur "Zumo Shield for Arduino" de Pololu (www.pololu.com/docs/0J57) - Traduit en Français par shop.mchobby.be CC-BY-SA pour la traduction
Toute copie doit contenir ce crédit, lien vers cette page et la section "crédit de traduction". Traduit avec l'autorisation expresse de Pololu (www.pololu.com)
Based on "Zumo Shield for Arduino" from Pololu (www.pololu.com/docs/0J57) - Translated to French by shop.mchobby.be CC-BY-SA for the translation
Copies must includes this credit, link to this page and the section "crédit de traduction" (translation credit). Translated with the Pololu's authorization (www.pololu.com)