Pololu-Zumo-Shield-Arduino-Composants-inclus
Révision datée du 7 avril 2017 à 13:40 par Admin (discussion | contributions)
 |
En cours de traduction/élaboration. |
The Zumo Shield is available:
- by itself lien pololu;
- as part of a Zumo robot kit for Arduino lien pololu that also includes a Zumo chassis lien pololu and a stainless steel Zumo blade lien pololu; or
- as a fully-assembled Zumo robot for Arduino lien pololu with 75:1 HP motors lien pololu and a reflectance sensor lien pololu array installed.
Le shield Zumo
The shield itself comes with the following components:
- right-angle slide switch
- two pushbuttons lien pololu
- buzzer
- 2-pin battery-charging header lien pololu
- three jumper wires (for soldering motors to the shield)
- two 25-pin 0.1" straight breakaway male headers lien pololu
- four blue shorting blocks lien pololu
- two 5/16" #2-56 machine screws (to be used instead of the 1/4″ screws included with the chassis kit if you attach a Zumo blade)
- 1/16" black acrylic spacer plate (two pieces)
Le kit Robot Zumo Arduino
Basé sur "Zumo Shield for Arduino" de Pololu (www.pololu.com/docs/0J57) - Traduit en Français par shop.mchobby.be CC-BY-SA pour la traduction
Toute copie doit contenir ce crédit, lien vers cette page et la section "crédit de traduction". Traduit avec l'autorisation expresse de Pololu (www.pololu.com)
Based on "Zumo Shield for Arduino" from Pololu (www.pololu.com/docs/0J57) - Translated to French by shop.mchobby.be CC-BY-SA for the translation
Copies must includes this credit, link to this page and the section "crédit de traduction" (translation credit). Translated with the Pololu's authorization (www.pololu.com)